Increased Tolerance Screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw and nut that just fit.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I could never get screws to print right. the threads never fit, or the tolerances were off, so while printing the Tablet and Notebook Stand from @Virus4711 I decided to make my own.
Printed on a MK4 with a little extra tolerance for other printers. they work, they screw together, and they have a nice feeling in the hand. I keep a set on my desk as a fidget toy.
Printed with MK4 with IS - Prusament PLA or Prusament PETG - 3 perimeters - 100% infill - 3mm Brim - no supports
I'll consider making other sizes or even parametric sizes of these if you guys like them.