Portable enclosure for Sonoff POWR320D Switch (for EV charging)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I built this case for a Sonoff switch to measure the energy consumed when charging an electric vehicle
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 605
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a custom case for a Sonoff switch to monitor energy consumption while charging an electric vehicle. It's particularly useful for charging at unmetered outlets or at hotels/guesthouses without dedicated EV charging stations, as long as the owners permit EV charging.
Components Used:
- Plastic cable gland
- M4 screws and M4 nuts
- 220V plug
- 220V socket with cover
- Electrical cables
Build Details:
- The Sonoff switch is secured inside the case using a plastic glue gun, allowing for easy removal by detaching the glue.
- The model requires no additional supports during 3D printing and was printed using Pineapple Yellow Prusament PLA.
Updates and Adjustments (as of 13.08.2023):
- Two nuts near the Sonoff unit need to be sawed down by about half (or more) for proper fitting. I used a small grinder, and the adjustment took less than a minute.
Connectivity:
To enable wireless functionality, the switch is configured to connect to a hotspot created by my phone. This setup ensures independence from the accommodation's WiFi network.