AIM Solo 2 DL V2 B size RAM mount with SUNVISOR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom mount with SUNVISOR created for the AIM Solo 2 DL V2 featuring a size B ball for Ram mounts on the back.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A custom mount with SUNVISOR created for the AIM Solo 2 DL V2 featuring a B size ball for Ram mounts on the back. This section is fully predisposed for the insertion of a screw + self locking bolt to stiffen the structure.
The support is equipped with a sun visor. On the back there are two locations for the installation of magnets measuring 20mm x 7mm. There are two small notches on each side which allow the magnets to get stuck once they enter and never come out again.
In correspondence with the 4 threads of the AIM there are 4 holes for fixing with screws. The support has notches that allow the AIM dashboard to install in a firm way.
A protection placed on the lower part allows to protect the cables going to the hub/sensors and not to bend.