Desk Mount Headphone Holder / Mount / Clamp - Bolt Remix ONLY
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
More room when printing with Nylon Carbon Fiber and other beefy filaments
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I printed the awesome reversed cable holder remix by Beaver in Nylon Carbon Fiber for a friend, and the tolerances for the screw were just too tight to work for me with all those extra chonky fibers.
This Remix is for the BOLT ONLY. Print Beaver's remix (or probably the original) clamp but pop this model on the plate instead of the original bolt if you need looser tolerances.
Printed on a Bambu Lab X1C with their PAHT-CF on the Engineering Plate (probably wouldn't do that again since the heat bubbled the surface but it's all I had that would work with this filament)
0.4mm hardened steel nozzle
0.2mm layer height
Bambu 3mf is set up for Carbon Fiber but could easily be adjusted. STL is just an STL. ;)