Aerobar End Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to replace the rounded end caps of the Profile Design T2+ aero bar.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Designed to replace the rounded end caps of the Profile Design T2+ aero bar. http://www.profile-design.com/profile-design/products/aerobars/aluminum-aerobars/t2-plus.html
My aero bars end caps got roughed up a bit from an accident so designed this as a replacement. I will post pictures soon.
*added the skp files so its easier for others to edit/modify.
design notes:
v5: I had to take a knife and cut down the top 2 rings a little bit to make it fit better. the tip was also very pointy to where it seemed like a hazard. so had to trim that down with a knife as well.
v6: shrank rings slightly, rounded the tip.added an internal structure to hold top ring on better.
v7: made it so it could print without supports, forgot to shrink rings though so they still may need cut down with a knife.
Instructions
Print 2 of these (for a matching pair).
You may need to adjust the size of the part depending on your aero bar. or trim down the holding rings with a knife.
*I have not tested version 6 yet.
*I printed version 7 and the tip of it got screwed up due to my printer hating me (began to air print at the tip(because the a/c was on/hitting it).
I Printed v7 with supports just for the top ring, and the support was super easy to remove unlike version 5.
Category: Sport & Outdoors