NO-ring flexible 12g CO2 cartridge mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts a pair of cartridges to the bottom-line screws of a paintball marker.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Intended to be printed entirely in TPU. The rings are not round and intended to flex when a cartridge is inserted. It may work in hard filament with a coating of rubber cement on the inside. I wouldn't bother with a metal printing. Print with the rings down. Since the mounting screws will not be able to get very tight, use a bit of dried blue threadlocker on them.
The first version was too tight and too flexible. This feels good, but let me know if you think it needs more grab.
This size is intended for use with Lelands and similar 12gs. I accidentally found that Crosman 12gs can be loose; you can scale the model a few % in one direction to tighten the rings up for that.