1 / 4
MR100104521 Side doors inner handle for Mitsubishi Delica L300 L400 — zdjęcie 1
1 / 4

MR100104521 Side doors inner handle for Mitsubishi Delica L300 L400

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slightly prolonged original handle. YOU WILL NEED ORIGINAL STEEL NUT+BOLT

Ocena
0 / 5
Polubienia
9
Pobrania
61
Wydruki
0
Wyświetlenia
566
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

About model

Optimised and prolonged inner handle for Mitsubishi Delica's sliding doors. Made for a friend's offroadsafari.cz orange Delica.

ASSEMBLY !

You need to put your original steel nut into plastic insert first, rounded side in. Match three slots on insert and handle and press it inside with vise (will help you to keep straight orientation). If you are not successful, try to file unwanted edges on handle or insert, which were made by printer when printing first layer.

Physical size

Lenght: 135 mm (prolonged by me to fit non-Asian hands too, haha)

Compatibility

Durability tested in Mitsubishi Delica L300 3th gen (1986 - 1994) by a thousands of Offroadsafari.cz guests.

Should fit to Delicas, L300, L400 (1986 - 2004)

Modifications

  • Prolonged to fit larger hands too
  • Invented an fixation system with insert for original steel nut which is strong enought to transer high torque from a 3D printed handle to the nut.

Print info

Should be an easy print overall.

Multicolor: In first layers there is a arrow showing direction in which you need to rorate the doorhandle to open doors. Can be nice to make those first layers with one color and rest of handle with another color to highlight the arrow.

MaterialPETG; ASA could be interesting
Layer heightvariable to make angled surfaces more smooth
Infill20% or more
Perimetersincrease number of walls to eliminate infill in parts around steel nut
Supportsdefault (not needed)
Nozzledefault (0,4 mm)
Duration± 2,5 hrs (Prusa MK3S - 100% speed)

If you like my design…

…please click "like", and post a make. This will help me to win some prusameters, and help other makers decide if this is a useful model. Thanks.

Tagi