Satisfactory - Ficsit Coupon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A physical memento of the hours you've dumped into the Awesome Sink
- Ocena
- 4,889 / 5
- Polubienia
- 123
- Pobrania
- 556
- Wydruki
- 11
- Wyświetlenia
- 2296
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2023/12/01: Added a step file with the two portions of the coupon separated out as well as a DXF of the sketch to aid with customization.
You've spent more hours than you care to think about routing endless items into the Awesome Sink, why not have a physical reminder of that time spent? Here's a super simple printable Ficsit coupon just for that. There's even a simple little stand to hold it up.
Two different versions, one intended for even layer heights the other for odd, just check the file descriptions. In your slicer you should be able to set the layer you want to change colors at, and some like PrusaSlicer will autodetect it. For “even_layerheight” it will be after layer 1mm, for “odd_layerheight” it will be after layer .9mm.
You will need to scale these down to your print bed or other custom size. I recommend leaving “Uniform Scale” enabled and adjusting to your X width, and then disabling it to set the Z back to 1.8mm. You can also use another thickness so long as your slicer will output the top layer fine, but the stands are intended for the default 1.8mm thickness.
You will also need a slicer that uses the Arachne slicing engine to make sure some of the thinner lettering structure comes out when scaled down. You'll be able to tell from the slicer preview whether the lines are there or not.
If you would like a version with some edits or changes, just let me know.