1 / 3
Govee Hygrometer Thermometer Original Prusa Enclosure Mount H5075
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a H5075 Ggovee Hygrometer Thermometer to the bottom plate of a Original Prusa Enclosure.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 632
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
The original hygrometer and thermometer that comes with the Original Prusa Enclosure is hard to read in my room as I leave the lights off most of the time. I wanted to be able to create a mount that I can use the LED light from inside the enclosure to read the display.
I decided to mount it to the bottom left of the enclosure using 2 M3x6 screws.
This mount will work anywhere and does not need to be screwed down to hold the Govee H5075. The display is fully visible in the stand