1 / 1
Handy spacers on a Sprue: 3mm ID, 5mm OD, 3mm height — zdjęcie 1

Handy spacers on a Sprue: 3mm ID, 5mm OD, 3mm height

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spacers on a sprue print more reliably than individual spacers. Use these when you need 'em. Resize 'em to your needs.

Ocena
5 / 5
Polubienia
8
Pobrania
108
Wydruki
1
Wyświetlenia
359
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Set this up because I often find myself needing spacers for mounting electronics. It's handy to print a few of these to have spacers around. They print well - much better than individual spacers in a pattern. The matrix of the sprue adds stick-down-to-print-surface strength.

Printed with 90% infill. I'm printing PETG on glass with hair spray for an adhesion component. Took about 15 minutes. Cut or twist spacers off the sprue to use, toss the rest into a desk drawer for spares.

Scale to any appropriate size and height for your needs.

Tagi