1 / 3
Honeycomb Storage Wall holder for Brother P-touch H105 label maker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HSW holder for Brother P-touch H105 label maker.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 110
- Wydruki
- 6
- Wyświetlenia
- 835
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 6) (Komentarze: 7)Remiksy (0)Kolekcje (39)Powiązane
No supports needed. I printed mine in PLA. Connect to two “Insert to M3” parts to connect to your HSW. I used M3x10 screws and M3n nuts.