1 / 3
Articulated Robot in 11 Minutes (enhanced) — zdjęcie 1
1 / 3

Articulated Robot in 11 Minutes (enhanced)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mini robot with articulated arms, legs and head and a print time of just over 10 minutes

Ocena
5 / 5
Polubienia
37
Pobrania
424
Wydruki
4
Wyświetlenia
1683
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

First of all, this is not my own design. If you like it, please send a tip to NirDobovizki.

Having identified some drawbacks in the original design regarding easy printability I pulled the STL on TinkerCAD and took a few minutes of my spare time to make some minor modifications to enhance bed adhesion.

While I was at it I also realized that there was enough space left in the body to make the robot head articulated, too!
So I simply copied one of the arm links there. Works like a treat!

Printing time is (only) a few seconds longer than the original V2 version; actually Cura shows both the old and new one as "11 minutes" with my settings.
I did not manage to print a robot V2 or V3 in under 10 minutes that actually looked nice.

 

Print Settings

 

Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 15%
Filament: bq PLA blue 
 

Notes: 

Make sure to enable the "Print Thin Walls" setting in your slicer, otherwise the first layer will not be sliced as required!Cura

 

 

Tagi