1 / 2
F1 Tires - Pencil/Pen Holder - More Stable Base - No MMU
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Moving the F1 logo inwards to have a clean separation from the base and be printable for us mortals without MMU printers
- Ocena
- 4,857 / 5
- Polubienia
- 73
- Pobrania
- 288
- Wydruki
- 9
- Wyświetlenia
- 2158
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 9) (Komentarze: 10)Remiksy (0)Kolekcje (89)Powiązane
In this model I removed the ramp and move the F1 logo back to the center a little bit so it start from a plane and it is printable with one single filament change.
Included the original base from @AstroStock and the indented version from @KarolCichon
