1 / 5
TTSR - The Tougher Safety Ring (door opener) — zdjęcie 1
1 / 5

TTSR - The Tougher Safety Ring (door opener)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is not my original design but merely a remix.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
192
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is not my original design but merely a remix. The original has been removed from the net by its author, though.

The Original by LeonWoodman was, without a doubt, one of the most nicely designed iterations in that ocean of more or less useful no-touch tools thingiverse has been flooded with at that time.

I decided to modify it a little for toughness, though. It is using a 16x3mm screw and a cheap M3x3x4.2 brass nut insert.

I also made some smaller modifications to ease assembly even a bit more.

I printed this in ABS+. No supports, rafts or fan required.

 

Tagi