Shaver wall holder (MultiClip)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall holder that should work with many commonly used multi-blade shavers.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 529
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall holder that should work with many commonly used multi-blade shavers.
If you want to use this thing, you need to print it along with two MultiClips of your choosing, enabling you to mount the holder to a surface in any way you prefer.
You can find the MultiClip in my public designs (with extensive explanation).
See the pictures for an impression of the mounted result. In that example I used a Glue Clip, put a glob of hot glue on it and pressed it against the wall. But there are also clips for screwing, stapling and even rail mounting available.
If you like the MultiClip idea you might want to have a look at some more MultiClip-enabled designs. You are also very welcome to use the MultiClip Templates for your own objects.
Print Settings
Printer Brand: Anycubic
Printer: i3 Mega
Rafts: No
Supports: No
Resolution: 0.15
Infill: 25%
Notes:
You will need cooling for the overhangs and bridging parts. If your printer is not good at bridging, add some support to the center of the clip gap.