1 / 1
Ryobi Tool Mount V2 (Heavier tools)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ryobi lockable tool mount
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
I made this mount to organize my Ryobi one+ tool collection on a framed 1/2" plywood stand. I used delta faucet replacement springs (Model 30300) for the release buttons. I also used 4x #8-32 2" flathead screws with washers and lock nuts to mount it to the plywood. I used a 4mm drill bit to make the holes in the plywood using the guide that i included in the print. After mounting the mount, adjustments may bee needed for the tightness to allow free movement of the release buttons. I used 30% infill.
Category: 3D Printing