Acorn RiscPC Flap Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement clip to hold the flap on an Acorn RiscPC in place.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a RiscPC slice from eBay that was an absolute bargain, it was however missing the spring from the right hand side of the flap and on the left hand side the clip that retains the flap was missing.
I fixed the missing sprint with a rubber band as luckily both of the pegs that attach to each end of the spring were intact.
I was unable to find a replacement clip, so quickly knocked this one up.
It's not 100% identical to the original, but it does work. The longer section that holds the clip in place may need to be trimmer slightly, but other than that this quick part works a treat!
I printed at 0.4mm nozzle with a 0.3mm layer height in PET-G.
I used organic supports for the overhangs.