1 / 2
Whistle Pocket Clip for Fox40 Sharx — zdjęcie 1
1 / 2

Whistle Pocket Clip for Fox40 Sharx

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a pocket clip for a Fox40 Sharx whistle, that holds the whistle pointed down, and does not interfere with the…

Ocena
0 / 5
Polubienia
3
Pobrania
38
Wydruki
0
Wyświetlenia
898
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a pocket clip for a Fox40 Sharx whistle, that holds the whistle pointed down, and does not interfere with the factory keyring or lanyard.

Fox40 Sharx Whistle (~$8): http://www.amazon.com/Fox-40-Sharx-Whistle-Lanyard/dp/B0034JITR0

Specs:

*Dimensions: 0.943"W x 1.383"D x 0.565"H
*Volume: 0.16 cubic inches
*Weight: ~0.01 pounds

Files:

*Clip: PTW-00-1-PT-0196 (Clip, Whistle, Fox40 Sharx).STL

NOTES:

  • .STL names do not match .SLDPRT name because Da Vinci will not print file names over 56 characters.

Print instructions

Category: Sport & Outdoors Summary

This is a pocket clip for a Fox40 Sharx whistle, that holds the whistle pointed down, and does not interfere with the factory keyring or lanyard.

Fox40 Sharx Whistle (~$8): http://www.amazon.com/Fox-40-Sharx-Whistle-Lanyard/dp/B0034JITR0

Specs:

*Dimensions: 0.943"W x 1.383"D x 0.565"H
*Volume: 0.16 cubic inches
*Weight: ~0.01 pounds

Files:

*Clip: PTW-00-1-PT-0196 (Clip, Whistle, Fox40 Sharx).STL

NOTES:

  • .STL names do not match .SLDPRT name because Da Vinci will not print file names over 56 characters.

    Instructions

    1. Position model on its side, as the file is oriented, for maximum strength.
    2. Use supports, under engagement tabs.
    3. Print.
    4. Trim any flanged edges, and clean up engagement tabs.
    5. Snap onto whistle. Fit should be snug.

Tagi