MK3 / MK4 Light Bar LED Printable U Channels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Looking for a printable solution for the U-channel where the LEDs sit within the light bar? Look no further!
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 165
- Wydruki
- 10
- Wyświetlenia
- 1466
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Rather not spend a ton of money on metal U-channels? I made a printable U-channel which I've used for a few months on my MK3S+ with no issues. The light is very bright, so you may want to add a light diffuser, but I've found the extra light to be helpful.
Due to length restrictions, the U-channel consists of four pieces (for a dual light setup); two per side, with a connector in the middle to connect the two pieces.
I'd recommend gluing the U-channel into the bracket end, attaching both brackets and then gluing the connector when in-place. Then attach LEDs and wire it up!