GeeekPi RPi UPS Case for RPi4 (EP-0136 Rev5)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified version of the GeekPi RPi UPS for newer revisions, & with QOL adjustments (threaded screws, button cover, etc).
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 1050
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an modification of the original RPi4 UPS case by Jason with changes and upgrades for the newer revision of the GeeekPi RPi UPS hat (aka EP-0136) for Raspberry Pi 4 .
UPS Link: https://wiki.52pi.com/index.php?title=EP-0136
Amazon.de Link: https://www.amazon.de/dp/B09V1CTGX5
📝 Print Recommendations: (0.2mm layer on 0.4mm nozzle recommended unless mentioned)
- RPI Case Bottom: 25% Infill + Any Filament (PLA+)
- RPI Case Top: 25% Infill + Any Filament (PLA+)
- RPI Case Middle: 25% Infill, Clear / Transparent Filament (PETG for transparency)
- RPI Case Button: 100% Any Filament (PLA+ @ 0.1mm layer)
I printed these on my AnkerMake M5 printer with stock settings. Gcode files where changed to Prusa Mk4.
📃 Changes Include:
- Change of Fan Size for 30mm fan (focus on positive pressure inside to provide indirect UPS cooling) [ADDED 40mm fan variant].
- Inclusion of Button Insert and alignment notch (for ease of activation/use).
- Increased spacing for Power input opening / tolerance (input plug sizing).
- Additional space for USB-C & MicroUSB inputs (new UPS revisions).
- Removal of RPi GPIO access opening (for increased fan performance).
- Change of mounting system to using M3 threaded inserts (4x M3x5mm or M3x4mm) and M3 screws (4x M3x25mm).
📨Edit Requests:
I'm happy to make revisions of this for different fan sizes (original model featured 40x40mm fan), and GPIO access opening. Just leave a comment!
Otherwise, feel free to remix this under the current license (inherited from original files).
📝 Change Log:
- 12/09/2023 - Added 40mm Top Enclosure Variant
🎩 Credits:
This is an edit of Jason's original UPS Case to update for more recent revisions of the HAT.
📚 License:
Inherited from Source under “Creative Commons - Attribution - Noncommercial - Share Alike”
🎀 Closing Note:
I have no formal training in CAD or Modeling software, these files should print well, and work; but aren't necessarily up to professional / experienced standards. TLDR: doing my best 😉
