PiKVM case: Pi Zero 2 W and CSI-2 board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for a PiKVM based on a Pi Zero 2 W and HDMI to CSI-2 adapter. Made with the YAPP Box framework.
- Ocena
- 2 / 5
- Polubienia
- 12
- Pobrania
- 141
- Wydruki
- 2
- Wyświetlenia
- 1139
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Just a quick PiKVM case for a Pi Zero 2 W with an HDMI/CSI-2 adapter. I also needed ventilation for the heatsink I used, which I mounted with the fins facing out towards the long grill on the bottom.
Props to and thanks for YAPP_Box, which is an amazing framework for programmatically making project boxes in OpenSCAD. You'll need to grab a release ≥v1.9 to go with the model if you want to edit it.
The Pi is attached with the threaded standoffs that came with the heatsink. The CSI-2 board is attached with a few M2.5x8mm screws.
(And yes, I know my print is a bit under-extruded. I'm still getting the settings for my 0.8mm nozzle dialed in.)