1 / 4
PTFE Holder for Festo QSM M5 4 Fitting / Prusa MK4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A PTFE holder I designed for my Reverse Bowden setup on the Prusa MK4.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 629
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (12)Powiązane
Would recommend a 0.15 layer height and PETG.
Tightening the QSM M5 4 requires a bit of force to dig into the thread. Use the wrench from the MK4 kit to tighten.
Update 2023-08-10: Added a version 2 with wider profile for stiffness, and hole as guide for filament to simplify the print.