Ford Transit Cell Phone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this to fit the odd shaped hole between the speedometer and the air vent on a 2018 Ford Transit van.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 472
- Wydruki
- 2
- Wyświetlenia
- 3600
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I designed this to fit the odd shaped hole between the speedometer and the air vent on a 2018 Ford Transit van. It should fit some other year models as well. The holder simply sits into the odd shaped hole making it secure. It will fit any phone up to 3.4 inches wide and .49 inches thick.
The “New Version” file is redesigned to fit larger Iphones. It will fit any phone up to 3.44 inches wide and .58 inched thick.
I have included the original .RSDOCX file in case you want to make changes to the size to accommodate different phones. The included gcode file is set to print in PETG at 40% infill and .20mm resolution.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
.20
Infill:
40%
Filament: Prusament PETG Anthracite Grey How I Designed This ===================
Designed in DesignSpark Mechanical.
Category: Mobile Phone