Sigma ROX mount spacer for 22.2 mm handlebar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The "Over-Clamp Butler" mount for Sigma ROX 2.0 / 4.0 / 11.1 / 12.1 doesn't come with spacer for 22.2 mm handlebars.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The Sigma Over-Clamp Butler mount: https://sigmasport.com/product/over-clamp-butler-gps/ comes with rubber spacers only for 31.8 and 35 mm handlebars, so I've made one for my 22.2 mm handlebar.
The inner circle is placed eccentric to be able to adjust the height of the mount.
The fit for the 22.2 mm is quite tight on purpose, but as you can see on the pictures it fits nicely.
I've printed it from Fiberlogy MattFlex 40D with a Prusa MK4 and textured sheet, using the appropriate filament profile in PrusaSlicer and 0.20 quality profile.
I've also added a brim, because my first print warped a bit during printing.