Board holder for storage tools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Board holder for storage tools
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 1265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I prepare board holder for storage tools. I focused primarily on electric instruments. The first part is installed on the wall with woodscrews 4x30. The second part is installed to the tool holder with screw M4x25 and nut M4. The third part is the tool holder. The tool holder can be variably attached and moved to different places on the wall. The first and second parts are oriented vertically for print. Then they have more strength.
Printing instructions for holder:
- filament PLA
- 0,2 mm layer height
- without supports
- infill 20%
Link for other tool holders:
- Clamp wall holder for Bessey GearKlamp
- Sander holder
- Angle grinder holder
- Screwdriver holder
- Pliers holder
- Hammers holder
- Wrench holder
________________________________________________________________________________________________________________
If you want to support my other projects, you would contribute to filaments at PayPal. Thanks.