1 / 6
Tefal Snack collection holder - from 4 to 10 plates — zdjęcie 1
1 / 6

Tefal Snack collection holder - from 4 to 10 plates

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tefal Snack collection holder for 4 up to 10 plates (2 to 5 pairs)

Ocena
5 / 5
Polubienia
19
Pobrania
90
Wydruki
4
Wyświetlenia
557
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

~ ~ ~ 🇬🇧 English ~ ~ ~

Holder for Tefal Snack collection plates for 2, 3, 4 and 5 pairs of plates. The plate's position in the stand is given - on the left side there's a cutout for the lock and on the right side of the model the supports are longer due to the plate connectors.

I advise using glue for the joints, it strengthens the model a lot - I wouldn't use it without applying glue first. To avoid even a slight movement of the holder, I applied a think double-sided tape on the sides.

This print does not require any print supports. I printed it with 0.2 layer SPEED.

There is no model for six pairs (12 pairs) because that doesn't fit the MK3S bed. No version of this model fits Prusa MINI.

 

~ ~ ~ 🇨🇿 Czech ~ ~ ~

Stojan pro plotynky Tefal Snack Collection, pro 2, 3, 4 a 5 paru. Pozice plotynky v drzaku je predem dana - nalevo patri strana se zamkem, napravo patri strana s uchytnymi pacickami na plotynce. 

Silne doporucuju model slepit modelarskym lepidlem v mistech spoju, velice se tim zpevni model a vlastne bych model bez lepidla ani nepouzivala. Abych se vyhnula jakemukoliv malemu pohybu stojanu, dala jsem po stranach tenkou oboustrannou lepenku. 

Tento tisk nevyzaduje vubec zadne podpery. Tiskla jsem 0.2 vrstvou SPEED.

Pro dvanact kusu (sest paru) ani neni model, protoze se nevejde na MK3S. Tento model se vubec nevejde na Prusa MINI.
 

Tagi