DHT Outdoor Housing -.extended base plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extended baseplate for the outdoor DHT housing
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 724
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Extended Base Plate
This is a remix of the baseplate for the Outdoor DHT housing by llite.
In my version, the cable doesn't leave the housing to the back, but to the bottom. Therefore I remodelled the baseplate in onshape (see link below).
I added holes for mounting and slots for cable ties.
Print instructions
I used white PLA … I will report here, if weather conditions ruin the part over time… ;)
Modifications welcome
You can remix or download the cad file from onshape:
The cover
As a cover I used the remix DHT Outdoor Housing V2 by Stefan. I addjusted the part in PrusaSlicer for a wider hole for the cable. I tried to print this parts with organic support, which failed two times, because the support became loose on the built plate… maybe the part really doesn't need support. In the end, I used regular support. See my make https://www.printables.com/de/model/249068-dht-outdoor-housing-v2/comments/1027806