1 / 2
Curvy Cam Lock Bag Clip With Magnets — zdjęcie 1
1 / 2

Curvy Cam Lock Bag Clip With Magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This bag clip adds 2 6mm x 1.75mm magnets to the Curvy Cam Lock Bag Clip so it can be stuck to magnetic surfaces.

Ocena
0 / 5
Polubienia
16
Pobrania
139
Wydruki
1
Wyświetlenia
812
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

This can be printed with no supports if the magnet holes are placed facing up on the print bed. Note that this is a remix of the 0.2mm clearance original only. For materials other than PLA, this clearance may not suffice as stated by the author this is remixed from.

I glued my magnets in but the fit is fairly tight so the glue can likely be skipped. I found it easiest to stick the magnet to the jaw of a pair of channel locks and then squeeze the magnet into place. It doesn't take much force and seats the magnet very nicely.

Tagi