standing Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple feet to put a (small) skadis board upright
- Ocena
- 5 / 5
- Polubienia
- 140
- Pobrania
- 429
- Wydruki
- 5
- Wyświetlenia
- 2755
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
based on the T-Clip System by Line Arc Line I designed two versions of a simple stand to put Skadis boards upright.
they work great for small 3d printed versions of skadis, I did not test them on a regular board so far but I guess it will tip over with too much weight on it.
the versions use one or two T-Clips and come in sets of two for left/right orientation of the board.
printed mine in PETG at 0.2 layers and standard prusaslicer settings. by placing them on the printbed like in the files you will get stronger parts but it needs a little support.
as always I highly appreciate every like, rating or make, same for remixing and sharing.
donations will be forwarded to sea-watch.org