Dynamod Game System - Modular Stairs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular stairs that snap into the tiles and pillars, any type of staircase arrangement can be created.
- Ocena
- 0 / 5
- Polubienia
- 6
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
More information on the website: https://dynamod.games
Complete collection of modular stone stairs. These allow you to build any type of staircase arrangement that you can imagine. The FDM models have small breakaway supports integrated and the Resin models come with pre-supported versions and even hollowed versions for the elevated spacers. All the models are now available in the private file area.
I also designed a stability joint that you can use to create a stronger connection between the spacers and your tiles. The little tabs on the tiles were designed for aligning the floors, and are often not strong enough to keep higher spacers firmly in place. The stability joint helps with that. You can also use this joint to connect spacers together and go really high!
Printing Instructions
Floors are designed to be printed both with FDM and resin printer. You'll have some scuffing at the bottom of the terrain with most resins, but this is hidden and shouldn't impact gameplay.
FDM printing
| Perimeters/Walls | 2 |
| Infill | 15% |
| Infill Pattern | Rectilinear |
| Perimeters Speed | 100% of normal |
For best results, use height range modifiers or printing processes.
From 0.0mm to 2.6mm:
| Layer Height | 0.2mm |
From 2.6mm to top:
| Layer Height | 0.1mm |
Resin printing
Ensure you're not overexposing the models or it will be very hard to fit the terrain onto the tile's alignment features.
Print vertically but with one corner all the way at the bottom (rotate 90° on the Y axis and 45° on the X axis). This allows for printing many at once.
No hollowing.