Star Wars U-Wing print-in-place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The U-wing starfighter is a ship from Star Wars first seen in Rogue One.
- Ocena
- 5 / 5
- Polubienia
- 173
- Pobrania
- 1065
- Wydruki
- 6
- Wyświetlenia
- 3526
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
The U-wing starfighter is a ship from Star Wars first seen in Rogue One.
This is a 1:270 replica with print-in-place foldable wings.
The wings in the model are oriented so that they require less supports while printing. On the finished piece, they can swivel all the way to the front and from there ~135° to the back.
Holder uses a medium base and small pin from here.
Print instructions
Rotate the model by -90° along the x-axis so that the engines and wingtips touch the printbed.
I have used supports on buildplate only and 0.7mm layer height.
I do not recommend changing the scale.
If you want to use the holder, use the .gcode-file with peg or add a small peg before slicing.
Check out the rest of Alphabet Squadron:
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#