Cap for loose frame rod in the Ortur Laser Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed fix for a design flaw with the Ortur Laser Enclosure.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
The Ortur Laser Enclosure has one rod that is not attached to the rest of the frame elements, only being secured to the fabric of the top of the enclosure, and tends to fall below the main frame, causing the tent-like enclosure to sag in the middle. It should be secured, but it is not. This printed component fits over either end of that rod, and holds it securely against the main side frame elements. The model can PROBABLY be printed without supports, provided you leave it on one edge, but its contact area with the build plate is pretty small, so you should probably include supports anyway. I had excellent success with organic supports.