Rotation Dispenser by KMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Who doesn't know the small parts that fly around everywhere and when you need them, you can't find them. Very annoying.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 635
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Who doesn't know the small parts that fly around everywhere and when you need them, you can't find them. Very annoying. But wait, there is a solution. The Rotation dispenser from KMS. In 3 easy steps just pick your part:
Select - Open - Get</center>
Why this Model?
- easy to print
The individual parts can be printed without support structures with any FFF printer. - easy to assemble
No glue or additional parts are needed for assembly. - flexibel
You can choose the number of compartments. Between 2-8 compartments are possible.
Each compartment can be labeled, small indentations are provided for this purpose.
Happy printing and stay tuned :D
Yours KERLE MAKERSPACE
PS:
Feel free to support my work by liking or leaving a comment.
Print instructions
Layer heigth: 0.2mm
Supports:
| Cover | Closer | Divider | Base |
|---|---|---|---|
| NO | NO | NO | NO |
Printing Temperatures:
| Nozzle | Bed | |
|---|---|---|
| First Layer | 240°C | 85°C |
</table>
Filament: Prusament PETG (Jet Black, and Prusa Orange)
Assembly:
- Insert the "Dividers" into the "Base" (larger gap towards the inside)
- Align the lever of the "Closer" with the slot in the "Cover"
- Press the "Cover" with the aligned "Closer" onto the "Base" (click)
Files:
Pls use the 3mf if you want to adapt the prints to your needs.
G-Code-Files for MK3S are provided.