MK4 bearing clamps for sinter bearings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamps to use sinter bronze bearings on the Y-axis
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 712
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I always tried to replace the ball bearings on my MK3S with other ones which do not rattle and so, but never made it work well.
Now, with the MK4 and the rubber pads it works very good, at least on the Y-axis.
It clamps are made for sinter bronze bearing 8x14x20mm like those:
https://caspar-gleitlager.de/produkte/gleitlager/buchsen/50/buchsen-sinterbronze/?number=CA-42574&option[9]=99&option[10]=108&option[11]=107
The single bearing on the right is symetric whereas the two on the left side are not.
Please make sure to mount them in the right direction to place them max close to each other like mentioned in the assembly manual.
You can print them standing on the flat mounting “wings” without support.
Runs very smooth and silent on my printer :-)