1 / 1
Gorilla - Pop Art Style (Filament Painting) — zdjęcie 1

Gorilla - Pop Art Style (Filament Painting)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament painted print made using HueForge - Filament swaps ONLY, no mmu/ams required

Ocena
0 / 5
Polubienia
22
Pobrania
35
Wydruki
0
Wyświetlenia
1079
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

7 Color HueForge model. 'Gorilla - Pop Art Style' filament painting made using Bambu Pla Matte filaments.

 

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

(I recommend the following speed settings for the bambu with 0.04 layers, inner walls, outer walls and gap infill - 200mm/s, sparse infill, internal solid infill and top surface - 150mm/s)

Filaments Used:
PLA Bambu PLA Matte Charcoal Transmission Distance: 0.6
PLA Bambu PLA Matte Dark Blue Transmission Distance: 1
PLA Bambu PLA Matte Marine Blue Transmission Distance: 2
PLA Bambu PLA Matte Ice Blue Transmission Distance: 3.5
PLA Bambu PLA Matte Scarlet Red Transmission Distance: 2
PLA Bambu PLA Matte Lemon Yellow Transmission Distance: 4
PLA Bambu PLA Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #8 (0.44mm) swap to Dark Blue
At layer #9 (0.48mm) swap to Marine Blue
At layer #10 (0.52mm) swap to Ice Blue
At layer #12 (0.6mm) swap to Scarlet Red
At layer #16 (0.76mm) swap to Lemon Yellow
At layer #19 (0.88mm) swap to Ivory White for the rest.
 

This is a filament blending model, I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results as this print uses mostly very low td filaments

Use the exact numbers in your slicer to match up properly.

Two different size models are supplied and designed to print with 0.4 nozzle

**If re-scaling model make sure not to alter the Z height of the model**

 

Tagi