KODAK Portrait Carbon Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The is a replacement for the single "carbon canister" supplied by the manufacturer. Since they do not sell or support…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The is a replacement for the single "carbon canister" supplied by the manufacturer. Since they do not sell or support their product in any useful and meaningful way I needed to come up with this.
This Part features a refillable activated carbon canister. You must find a way to keep the carbon in (pantyhoes,foam, ect). Easily done with hot glue, CA glue or something similar.
The canister slides in and is covered with the 3m filter style mount. you must use pancake filters to not obstruct the homing operation of the printer.
This has proved satisfactory after many long prints without being able to smell anything from the printer.
Additional info:
-It is all possible to maintain without removal of the back blower fan.
-Uses m3 brass inserts and several m3 bolts to secure the parts together
- A small thin foam gasket must be cut or printed in tpu to get the proper tension on the filter to seal and for the positive engaging click feel found on 3m respirators.
Category: 3D Printer Parts