TI4 Fleet Stand

I wasn't impressed with existing fleet stand options for TI4, as they didn't have a good way to keep parts from sliding off. My solution is to use a laser cut or machined acrylic/polycarbonate top piece, with a border that snaps around and legs that screw in.
If you can chamfer the holes in the polycarbonate piece then you can use m3 flathead screws, or else you can just use button screws with the 2D hole. The legs will print with a ‘thread’ but it is intentionally designed to be tight. I gently ran a tap through it (or a socket screw in a drill chuck) to make it easier to screw the actual legs in. You can scale the slice of the components if needed in your slicer to get the fit perfect.

The 3mf file is how I printed my parts - 2 sets at a time plus a spare leg. The dxf is available for laser cutting the clear piece, which is the ideal way to do it, but if you can't do that, I also added a fully solid piece you could print for the middle in a few configurations (with supports or without supports then screw the legs on.

Sldprt and step file included so you can alter as you wish.