Blank 24-400 vial cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cap will fit your Pioreactor 20ml and 40ml vials.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 245
- Wydruki
- 0
- Wyświetlenia
- 1045
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution
Update: Use this model instead now!
This cap is blank design to use as is, or as a canvas to add more designs into. It fits onto the 20ml Pioreactor vial with 24-400 threads.
Printing
Important: only use high-temperature plastics if you plan to heat-sterilize this cap. We use Prusa's Polycarbonate and Polycarbonate-CF
3 vertical shell perimeters
0.15mm layer height
Print with the top-side down for best results
Adding an o-ring insert underneath
To avoid leaks, we add a 1/16" W, 3/4" ID, 7/8" OD o-ring underneath. It's secured with some high-temperature silicone. Tip: we put the uncured silicone into a syringe to apply.