Anycubic Kobra 2 Top Mount Spool Holder Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A connection to mount the spool to the top of Kobra 2, added extra place to connect other plugins, like camera, etc
- Ocena
- 4,667 / 5
- Polubienia
- 60
- Pobrania
- 461
- Wydruki
- 1
- Wyświetlenia
- 4823
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a connector to mount the Anycubic Kobra 2 spool holder to the top instead of left side. I do not want to abandon the original spool holder, so I make use of it.
There are 8 holes in this connector, functions as below:
- Center 2 holes: Pin this connector on the top of printer, with 2 M5 * 15 / M5 * 20 bolts
- Hole #3 and #6: After the original spool holder inserted into the connector, pin the "half cylinder bar" with the connector to fasten the spool holder. Will need 2 M4*(15 ~ 20) bolts and 2 M4 Hexagon nuts. (There are holes to insert the Hexagon nuts into the connector)
- Hole #1 #2 #7 #8: Anything you'd like to connect to the top, just if you have M4 bolts & M4 Hexagon nuts.
You may also make use of the Filament runout detector, print out the small connector, and assemble it with the embedded M3 bolt. (You will need some 3 pins line to extend it)
Feel free to modify the f3d file to meet your bolts.
How to print:
- Print with PETG, set 5 or more walls to enhance the strength
- Open the full_model_with_proper_printing_side.stl file, all modules could be printed with this direction without support
If you do not want to use the original spool holder, instead, you'd like to make it with the 2020 Reverso Context. There is a connector for you as well. I printed it with Kobra 2, it could be connected with the reverso context very tight without any bolts. But you still be able to make it tighter with some M3 bolts.