Fallingwater - Pennsylvania, USA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🇺🇸 Miniature model of a modern American architectural masterpiece. No supports, multipart assembly.
- Ocena
- 5 / 5
- Polubienia
- 238
- Pobrania
- 1107
- Wydruki
- 5
- Wyświetlenia
- 6024
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🇺🇸 Welcome to Pennsylvania, USA
Fallingwater is a house designed by the architect Frank Lloyd Wright, built in 1936 partly over a stream and waterfall in southwest Pennsylvania, about 70 miles (110 km) southeast of Pittsburgh, in the United States. It was commissioned by businessman Edgar J. Kaufmann as a weekend retreat.
Despite problems during its construction and elevated maintenance costs, it is considered one of the most beautiful houses in the USA and tops rankings of conservation, architecture and tourism (from Wikipedia).
MiniWorld3D is happy to bring this historical model to life as a homage to all the people of the USA. Please give credit, it's all about spreading culture!
Consider Joining our Printables Club, or supporting us on Patreon!
Find all our profiles, YouTube channel & social media on:
Join our 40K followers on IG!
MiniWorld 3D is a collective of 55+ artists creating the best library of 3D printable models of landmarks of the world!
Thanks to @FilamentStories for the amazing video and print photos, printed with Facilan C8 Filament from @3d4makers.
-----------------
PRINT SETTINGS
No supports.
Print slow, such as 20mm/s outer perimeters.
Infill 12%
Print each part flat on the bed, and assemble after following the numbering system of the file names. Alignment is straight-forward. Glue is necessary.
The water staircase can be printed flat on its side, with the vertical railings flat on the bed. Mirror the stl if you want the railings on the opposite side.
The water (creek) part is optional.
Do not scale under 100% with FDM nozzles of 0.4mm, small details will not slice correctly. Only reduce scale if printing with resin or a smaller nozzle.