Big Einsy Case Extruder and X-axis Cable Holder Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love the Big Einsy Case design by Boogie. But, I didn't like the x-axis cable going out of the cover and to the side.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 157
- Wydruki
- 1
- Wyświetlenia
- 1249
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I love the Big Einsy Case design by Boogie. But, I didn't like the x-axis cable going out of the cover and to the side. I thought there might be an opportunity to have the cable stay flat against the side of the case while also making the cover removable without affecting any cables. After experimenting with a few options, this is the result.
Replacing the Extruder Cable Cover with this adds an extra hole for the X-axis cable. There is are zip tie holes to secure the cable at the end of the cloth sleeve. The plug on the end of the cable barely fits through the hole by turning it at an angle. This leaves plenty of travel for full z-axis motion.