Echo 8 Show undercounter mount (magnetic)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic latched undercounter mount for Echo Show 8
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 1684
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Mount for an Amazon Echo Show 8 (not sure which version we have or how they differ).
All parts printed as oriented with no support. Go fairly strong wall on main legs. I used 3x wall with 0.6 nozzle and some cubic infill.
Assembly:
Bottom plate, set 2x 3mm heat set nuts from the top side (only two pairs of holes). Once these are set, the key will glue in. This is a way to make sure you are using the correct holes as they should not be where the key fits.
Before gluing in the key, turn over and press in 6mm magnets at 6mm depth. I used 2x 6x3 magnets in each hole, but 3x 6x2 would also work. I pushed them all the way down with a hex key.
Glue in the key to cover the M3 heat set nuts.
Attach the arms to the bottom with M3 bolt.
Heat set 2 pairs of M3 nuts on the top piece. The outer holes will be mounting for the cabinet, so set those from the bottom. The inner hole hold the arms in place and should be heat set from the top.
Note: You may want to use the top piece as drilling template prior to heat setting the outer nuts and attaching the legs.