Wowgo Bumper / Bashguard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are bumpers that I created to fit my Wowgo 3 board. The bumpers slide on nicely and have a nice "snap" into…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 167
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
These are bumpers that I created to fit my Wowgo 3 board. The bumpers slide on nicely and have a nice "snap" into place. They are held on by the nuts on the hardware bolts.
The nice thing about these bumpers is you don't have to put printed plastic where your risers are supposed to be, and they are easier to replace once they get chewed up.
These may work on other boards that have a similar shape.
If you would like to modify, I made this in TinkerCAD, you can access the model here: https://www.tinkercad.com/things/d1GeT8i2TfV
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.12
Infill:
30
Filament: Hatchbox PLA Orange How I Designed This ===================
This was definitely my most iterated design. I probably printed 7 or 8 versions to get the sizing right. Since I'm only really familiar with TinkerCAD, I tried to upload a picture, go off that to build it up, and modify as needed.
Category: R/C Vehicles