Lego Saturn V Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount that works out of the box with the Lego Saturn V base, following the aesthetics of the original supports.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 117
- Wydruki
- 5
- Wyświetlenia
- 1914
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount that works out of the box with the Lego Saturn V base, following the aesthetics of the original base. There are two options for the mount design:
- Skeletonized design: It's more in line with the industrial design of the Lego supports. Easy to mount on the wall.
- Flat design: More robust and easier to print, however the upper screw is tricky to fasten. I've included a simple tool for hex bits to help with that.
Both versions for the mount can be printed without support since the angles of the ribs are not that aggressive (only the connectors will need some).
BoM:
- Stage 1 Support:
- 1x Saturn V Mount Flat / Skeletonized
- 2x Saturn V Connector Medium
- 2x Saturn V Connector Short
- 2x M4 Screws, Flat head
- Stage 2 Support:
- 1x Saturn V Mount Flat / Skeletonized
- 2x Saturn V Connector Medium
- 2x Saturn V Connector Short
- 2x M4 Screws, Flat head
- Stage 3 Support:
- 1x Saturn V Mount Flat / Skeletonized
- 1x Saturn V Raiser
- 2x Saturn V Connector Long
- 2x Saturn V Connector Medium
- 2x M4 Screws, Flat head
Printing:
- Print the Mounts with the face where the screws go facing down.
- This is a structural part so don't save on filament.
- Recommended: 6 Walls at 15 % infill.
*You can test your printer capabilities with my QuBenchy - 3D Printing Torture Test Cube:
Feedback is welcome. Cheers!
------------------------------------
Rendered in Blender, using Blender Boom's Desk Scene and @Az3Dip's Ender 3.