Side mounted daylight for Voron V0.2 (0 V0 0.2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's mounted inside and tilted - making daylight very slim and making 3d print well lit
- Ocena
- 5 / 5
- Polubienia
- 105
- Pobrania
- 470
- Wydruki
- 4
- Wyświetlenia
- 2045
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
All the daylight on a matchstick mounts are made to be mounted on the top of the extrusion, making it not so elegant. I made a version that hides inside the voron's body, invisible from the outside. Placed at 45 degree angle so the light hits 3d print perfectly. Standing half a meter (one voron0's height for Americans) away makes the lights not blind you (unlike standard bottom extrusion mount).
As official's daylight - this mod requires 4x M3 insert, 4x M3x6BHCS
This mod requires tight tolerances! Check everything before printing with it.
update 2024-10-04
Increased tightness and cut out the top, so it won't obstruct stealthburner's zip-ties