2020 T-Slot Raspberry Pi3 Bear Upgrade Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Licantrop's remix for the Bear Upgrade is great but I needed it to work with T slot 2020 extrusion for my custom…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 140
- Wydruki
- 2
- Wyświetlenia
- 1005
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Licantrop's remix for the Bear Upgrade is great but I needed it to work with T slot 2020 extrusion for my custom printer and M3 bolts because who really has a bunch of M2.5 laying around.
Since this is for T-slot you do need a wee bit of support under the alignment tabs.
All the bolt holes have sacrificial layers so you will need to drill them out with a 3mm bit.
You'll need:
2x M5x10
2x M5 T-Nuts
4x M3 x 20mm Socket Cap head
4x M3 Nuts
.f3d files included if you want to make more edits. (Thanks again to Licantrop for providing them which made this remix SUPER easy)
Print instructions
Print Settings
Printer:
Mega Tron
Rafts:
No
</div>Supports:Yes
Resolution:
0.2 mm
</div>Infill:20%
Filament: Sunlu PETG Green