Dart Zone Max Outlaw Cosmetic Plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Top plates for the DZM Outlaw
- Ocena
- 5 / 5
- Polubienia
- 86
- Pobrania
- 610
- Wydruki
- 11
- Wyświetlenia
- 2788
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are drop in replacements for the top most red plates on the Dart Zone Outlaw. To remove your stock plates, undo the 3 screws, and then you will need to pull them out. There is a clip towards the back of the plates near the rear iron sight, this may give you some trouble.
These are 9inches long, meaning they will need a pretty big build plate, with good adhesion. I had some warping problems while testing, but eventually they came out great. I like to print them with the screw holes facing up, and with no supports.
There are two included styles: One that is blank and completely flat, and another that has the cutouts like the stock plates have.
Reuse the stock screws. They will work well
Other Mods Shown
Dart Zone Max Outlaw Replacement Frontends
Dart Zone Max Outlaw Safety Delete
Dart Zone Max Outlaw Front Picatinny (and others)
Dart Zone Outlaw Replacement Cylinder
Don't have a printer? Order from OOD! Affiliate link!