15 degree tilt Support for Wansview Q5 Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 15 degree tilt Support for Wansview Q5 Cameras
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
When installing Wansview brand cameras at home, especially the Q5 models, I needed to tilt them to the bottom, because I wanted to place them on top of a cabinet.
I did not want to drill to put their arm, so I decided to make this support, to put for example on top of a piece of furniture, and which allows the camera to tilt down by about 15 °.
Just in case, I still put some screw holes on the rear so that you could attach this bracket to the wall if needed.
I hope this design can be used by others.
Forgive the imperfections, I'm not a 3D design pro, I used TinkerCad to do this ;)
For better results, I have found that it is needed to print at a minimum of 25% fill, because on how the filament is put on the fill pattern to create the slope of 15°
So in summary, you need to have a tight fill pattern.