HueForge - Brand from League of Legends
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi-color print of Brand from League of Legends, printable with 6 manual filament swaps.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 936
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
One of my first Hueforge projects, featuring Brand from League of Legends. Print size: 200x113mm.
Hueforge lets you create 3D-models from any image, using filament swaps at the right layer based on the transparency of every filament. It's recommended to use similar filaments at least to get the same result.
This model can be made on any well-tuned FDM printer.
I used these filaments for this project:
- Generic black PLA
- Polyterra Earth Brown PLA
- Generic red PLA
- Bambu basic orange PLA
- Polyterra Savannah Yellow PLA
- Polyterra Cotton White PLA
Settings:
0.4mm nozzle, layer height 0.08mm, with a first layer of 0.16mm, 100% infill. Do NOT use different values for this model. Rescaling the model is also not recommended; if you do, at least leave the Z-dimension unchanged.
Filament swap or pause moments:
Start with Black
At layer #6 (0.56mm) swap to Earth Brown
At layer #13 (1.12mm) swap to red
At layer #18 (1.52mm) swap to Orange
At layer #29 (2.4mm) swap to Savannah Yellow
At layer #35 (2.88mm) swap to Cotton White for the rest.
License information:
Since a picture from League of Legends was used, the model may not be used/changed for commercial purposes in any way, as stated in their legal corporate mundo jumbo (I'm less of a lawyer than corporate Mundo, so use that info as you wish).