Monitor mount

I designed the forerunner model two years ago and wanted to know if it works permanently and it does. I printed everything in PLA with 100% infill because I had no other material back then but it also worked. Designed the wall plate and the monitor mount either so they are capable to print. You can print the beams but i'd rather make them out of aluminum or steel because they withstand the stress better. If you make them out of 20x20mm aluminum squaretube you can make them longer like I did. I made the beam2 170mm and the beam1 160mm so all three together equals 500mm like you can buy in hardware stores.

Print:

1x wall plate
2x shim
1x bushing
1x monitor hinge
2x wall hinge
1x monitor mount
(1x beam1) 
(2x beam2)
 

For assembly you need:

8x M4x16 cylinder screws
4x M4x12 cylinder screws
12x M4 nuts

1x M8x100 hex head screw or a 110mm threaded rod
1x M8x70 hex head screw
1x M8x40 hex head screw
3x M8 lock nuts or secure with loctite
Add one more M8 nut if you make the version with the threaded rod.